Qingzhou Weimin Beer Filling Machine Factory

1. Power voltage: 220 V

2. Motor power: 50W

3. Beer temperature: 1℃-3℃

4. Air pressure: 0.2 MPa

5. Production capacity: 300 barrels/ h

6. Dimensions: 1700 * 600 * 1700 (length * width * height );

The structure includes foundation, electrical control system; gas-liquid balance tank, filling valve, etc., which is simple and compact. The machine is easy to be installed and operated.  

With isobaric filling as the filling method, the machine can control the liquid level in the barrel. The liquid level in barrels with same volume and type can be adjusted according to different requirements, with the offset less than 10 mm.

Isobaric filling machine is based on the equivalence between air pressure and liquid pressure. During the filling procedure, air is first filled in and then the liquid, which flows down barrel walls. The required liquid level can be reached at once without foams. This advanced filling machine has solved the problem existing in atmospherical pressure filling machine and high pressure filling machine, that the filling of draught beer cannot be finished at once.

http://www.chinaqzwm.com/